Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance,
please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you
to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who may use the appliance also reads them
beforehand. Our equipment is designed for professional use and must not be used by children under any circumstances.
• Carefully remove the equipment from the
packaging and take out all the boxes or packets
containing attachments or specific items.
• Warning- Some parts are very sharp e.g. blade.
Wear cutting gloves when handling the blade.
• You are advised to install the wall bracket provided
with the machine and to store your Immersion
Blender on it. Hang the mixer with the motor unit UP.
POWER SUPPLY
a. Connect the mixer to 110-120 Volt 60 Hz Power
supply.
b. Connect the mixer only to Ground Fault Interrupt
(GFI) Safety type outlet.
c. Do not connect the mixer with extension type
power cord.
d. GFI type outlets protect the machine from
expensive damage and protect the operator from
serious injury or death.
SPECIFICATIONS
• CMP 250 V.V. 120V/60Hz / 3 Amp.
• CMP 300 V.V. 120V/60Hz / 3.2 Amp.
• CMP 350 V.V. 120V/60Hz / 3.5 Amp.
• CMP 400 V.V. 120V/60Hz / 4 Amp.
• CMP 250 Combi 120V/60Hz / 3 Amp.
• CMP 300 Combi 120V/60Hz / 3.2 Amp.
IMPORTANT WARNING
UNPACKING
B
STORAGE
D
C
Blade Attachment Capacities
• Thanks to a very powerful motor, the CMP 250
can process up to 16 quarts, CMP 300 can process
up to 32 quarts, the CMP 350 up to 50 quarts, the
CMP 400 up to 65 quarts. The quality of the finished
product is outstanding.
Whisk Attachment Capacities
• Using the whisk attachment CMP 250 Combi and
CMP 300 Combi process from 2 to 30 egg whites
and puree 2 to 70 pounds.
• Each Immersion Blender is supplied with a wall
support for easy storage.
ROBOT-COUPE immersion blenders are equipped
with a safety system comprising of a :
DIMENSIONS (in Inches)
CMP 250 Combi
CMP 300 Combi
A = 3
/
A = 3
/
3
3
4
4
B = 26
/
B = 28
/
7
15
64
32
C = 3
/
C = 3
/
9
9
16
16
D = 11
/
D = 13
/
3
11
4
16
E = 15
3
/
E = 15
3
/
8
8
F = 4
3
/
F = 4
3
/
4
4
A
CMP 250 V.V.
CMP 300 V.V.
A = 3
/
A = 3
/
3
3
4
4
B = 24
/
B = 26
/
59
29
64
32
C = 3
/
C = 3
/
9
9
16
16
D = 8
/
D = 12
7
8
E
CMP 350 V.V.
CMP 400 V.V.
A = 3
3
/
A = 3
3
/
4
4
B = 29
/
B = 30
/
11
15
64
16
C = 3
/
C = 3
/
9
9
16
16
D = 14
/
D = 16
/
5
1
16
4
F
SAFETY FEATURES
W A R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
• Safety control button
This safety mechanism prevents any unintentional starting
of the immersion blender. In fact, it is necessary to press
down two buttons to start the immersion blender. In
order to start the machine, read the paragraph entitled
OPERATING THE APPLIANCE (page 6).
• Thermal protection system
If the appliance is left running for too long, the thermal
protection system will automatically shut it down. If
this happens, wait for the appliance to cool down
completely (approx. 30 min.) before following the
procedure for OPERATING THE APPLIANCE (page 6).
• No volt release a supply failure
In the event of a power cut or after the machine has
been unplugged, the immersion blender will not
restart by itself. It is necessary to follow the steps in
the paragraph entitled OPERATING THE APPLIANCE
(page 6).
• Power cord safety
Before you connect the power cord to the mains
supply, always check that this cord:
1°) is not damaged in any way;
2°) has been properly connected to the machine
handle. If this is not the case, follow the procedure
for OPERATING THE APPLIANCE (page 6).
• Be careful when handling the blades. They are
very sharp! Wear cutting gloves when handling the
blades.
WARNING
5
01/06/2021
Publicidad
