Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING THE FAN BLADES
CAUTION: To Reduce The Risk Of Electric Shock, Disconnect The Electrical
Supply Circuit To The Fan Before Installing Fan Blades.
Step 1. Attach the fan blades to the flywheel using the blade screws and tighten
them securely. (Fig.13)
INSTALLING THE LED LIGHT KIT ASSEMBLY
CAUTION: Before continuing installation, confirm that the power is still
turned off at the main circuit breaker or by removing the circuit fuse. Turning
the power off using a wall switch is not sufficient to prevent electrical shock.
Step
1.
Hold the LED light kit assembly close the motor and connect the pin
connectors together. (Fig. 14)
NOTE: The connectors have keyholes that must be mated correctly before
they can be engaged.
Step
2.
Tuck the connections neatly into the LED light kit assembly, raise the
LED light kit assembly up to the motor, align the red dot labels, and twist screws
on top of LED light kit toward the narrow end of the slotted holes on the motor
as shown. Make sure all screws lock in place and LED light kit no longer turns.
(Fig. 14)
Blade Screw
Fig. 13
LED Light Kit Assembly
Fig. 14
48"/ 54" Volos LED | 13
Blade
Publicidad
