Actions To Correct Abnormal Displays - Hitachi PW1A Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING (continued)

Actions to Correct Abnormal Displays

Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the
adjustments suggested below. (only for RGB2)
Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1).
Symptom 1
The display image appears flowing (figure 2) (RGB input).
Figure 1
Example
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
Adjustment
3) Press the
procedure
4) Press the OK button. The Setup Menu will be displayed.
5) Press the
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock adjustment.)
6) Press the
7) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
• The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Text displayed across the screen appears blurred in its entirety (figure 2).
Symptom 2
A fine pattern flickers when displayed on the screen (figure 3).
Figure 2
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Example
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
3) Press the
Adjustment
4) Press the OK button. The Setup Menu will be displayed.
procedure
5) Press the
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
6) Press
or
clean across the screen.
Vertical
Before adjustment
streaks
Some characters
are blurred.
ABCDEFGHIJ
ABC
B
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
SELECT button and select Setup.
SELECT button and select Horizontal Clock.
or
ADJUST buttons and search for clear characters over the entire screen.
Before adjustment
ABCDEFGHIJ
ABC
ABC
ABCDEFGHIJ
After adjustment
ABC
SELECT button and select Setup.
SELECT button and select Clock Phase.
ADJUST buttons to make the text appear
After adjustment
ABC
All characters appear
crisp now.
After adjustment
ABC
ABC
All characters are
blurred.
Figure 3
6) Press
or
ADJUST buttons to make the text appear
without flickering.
Before adjustment
After adjustment

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cmp420v1Cmp420v2

Tabla de contenido