Biral ModulA RED Serie Instrucciones De Instalación Y Funcionamiento página 13

13 english
4. Installation
4.1 General notes
ModulA is only intended for installation indoors.
The pumps must be mounted voltage-free so that no energy
can be transferred from the pipes to the pump casing.
The pumps can be installed directly in the pipe, provided
the pipes are designed for the weight of the pump.
Installation is only possible after completion of all welding
and soldering work on the system. Avoid drops of water
on the pump motor, especially the frequency converter.
Warning
The local regulations for the lifting
and carrying of loads must be adhered to.
The weight of the pump is given
on the packaging.
4.2 Permissible installation positions
− The installation position of the rotor shaft must always
be horizontal.
961569_00