Biral ModulA RED Serie Instrucciones De Instalación Y Funcionamiento página 21

21
5.4 SWITCH settings
− Fault or operating signal
(can be switched over)
– External OFF or
external ON
(can be switched over)
– Power limit
(can be activated)
Bold lettering
= as delivered
5.5 Power Limit
The pre-set maximum
volume flow is at the end
of control characteristic
curve 3 (proportional
pressure).
Via Biral Remote, the volume
flow limit can be set from
25...90%.
english
Function
ON
OFF
Switch 1 Switch 2
Fault Default
or operating external OFF
signal or
external ON
Clamps External
operating ON
signal
52, 54, 51
Clamps fault External
signal OFF
52, 54, 51
Power Limit ON
Setting range
Switch 3
Power Limit
ON
11 10
OFF
11 10