Biral ModulA RED Serie Instrucciones De Instalación Y Funcionamiento página 16

16
1
2
1
english
For pumps of a smaller design (P1 small 750 W)
it is not necessary to take out the frequency converter,
the pump head can be turned fully.
The sensor cable must also be separated in advance
from the frequency converter!
961575_00
Turning the pump head
without taking out the frequency
converter:
ModulA type:
40-10 220, 40-12 250, 40-18 250
50-6 240, 50-12 270, 50-18 270
65-8 270, 65-12 340, 80-8 360
4.4 Install the pump in the unit
➀ Close the shut-off valves and ensure that the system
is without pressure when fitting the pump.
➁ Install the pump in the pipe with seals.
961587_00
90°
Turning the pump head with
removal of the frequency
converter:
ModulA type:
100-12 450
Warning
Do not drop the disassembled pump parts!
Warning
Risk of injury from escaping steam!
90°
961605_00
65-15 340
80-12 360