Publicidad
Linking and Activation
DJI Matrice 3D Series aircrafts should be linked with DJI Dock 2 for automated flight
operations. Power on DJI RC Pro Enterprise, run DJI PILOT
complete linking, activation and dock configuration.
The DJI RC Pro Enterprise remote controller can also be linked to the aircraft and used as
controller B for manual control. During on-site flight tests, controller B can take control and
manually control the flight. Refer to the DJI Dock 2 Quick Installation Guide for the linking process.
• The aircraft requires activation before first time use. An internet connection is required
for the remote controller during activation.
Usage
Scan the QR code or go to the address to watch the tutorial videos and read the related
manuals such as the Safety Guidelines, User Manual, and Installation and Setup Manual.
Make sure to understand the safety precautions and learn more about aircraft information.
https://enterprise.dji.com/dock-2/video
Specifications
Model
Operating Temperature
Video Transmission System
Operating Frequency
Transmitter Power (EIRP)
Max Transmission Distance
[1] In some countries and regions, the 5.1GHz and 5.8GHz frequency bands are prohibited, or the
5.1GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for
more information.
6
M3D/M3TD
-20° to 45° C (-4° to 113° F)
O3 Enterprise
[1]
2.4000-2.4835 GHz
5.150-5.250 GHz (CE: 5.170-5.250 GHz)
5.725-5.850 GHz
2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.1 GHz: <23 dBm (CE)
5.8 GHz: <33 dBm (FCC/SRRC), <14 dBm (CE)
15 km (FCC), 8 km (CE/SRRC/MIC)
TM
2, and follow the instructions to
https://enterprise.dji.com/dock-2/downloads
Publicidad
