Publicidad
Idiomas disponibles
Idiomas disponibles
Keep warm function
How it works
Switching
on the keep warm function
Switching
off this function
All the elements have this function.
The keep warm function may be used to melt chocolate or butter or to keep food
warm. It only works with cookware designed for induction cooktops.
If the "keep warm" function is activated, the element automatically switches to its
minimum power setting to keep cookware warm.
Follow the steps below:
1.
Select the required element
2.
Press the KEEP WARM symbol. The L indicator lights up. You have now
activated the function
Follow the steps below:
1.
Select the required element
2.
Press the 0 symbol. The L indicator goes out. The function will be deactivated.
The Powerboost
Function
Restrictions
when using
the Powerboost
function
Use this function to heat up the contents of the pan faster than by using the heat
setting g. This function allows you to increase the maximum power level of the
element in use.
The Powerboost function may be used providing that the other element in the same
group is not switched on. (See picture) For example, if you want to activate this
function on element 5, number 4 (located behind it) must be switched off, and vice
versa. If this element is not off, the letter P and heat setting g will flash on the
element indicator; then it will return to heat setting g without activating the
function.The same applies to elements 1 and 2.
In group 2, the powerboost function can be activated at the same time on all the
elements. (see figure).
Group 1
Group 2
Group 3
19
Publicidad
