GE AJCM 08 ACD Manual De Instrucciones página 21

Installation Instructions
r_ INSTALL WINDOW GASKET AND
LOCKING BRACKET
[] Cut the foam top window gasket to the window
width.
r_ stuff the foam between the glass and the window
to prevent air and insects from getting into the
room.
r_ Attach the window locking bracket with
1 tgpe E screw.
I
rg] REPLACE AIR CONDITIONER
IN CASE
Carefullg slide the air conditioner back into
the case.
r_ Attach the power cord to the base pan with
the clamp.
pan
rc] Reinstall the locking plate with the tab behind
the wall case flange. Tighten the screw.
4N )11
Loc ;
r_ Reattach the front grille. An opening for the power
cord is on the bottom of the front grille.
r_ Fill holes and cracks with caulking provided bg
the installer.
Powercord
21