Publicidad
Idiomas disponibles
Idiomas disponibles
Gas Connection
WARNING: Before starting any work related with gas installation,
turn off gas supply. Risk of explosion.
Check if the appliance settings are compatible with the local
distribution conditions (gas type and gas pressure) before placing the
appliance.
Main gas pipe
Gasket
Hose entry record
Metal clamp
LPG connection hose
Main gas pipe
Gasket
Nut
Natural gas
connection hose
WARNING: All kinds of work to be performed on gas equipment
and systems should be carried out by authorised and qualified
persons.
WARNING: Do not move a gas connected appliance. Any force
may cause gas leakage as it may loosen the hose.
For LPG connection, attach the metal clamp
to the hose coming from the LPG cylinder.
Install one end of the hose by pushing it all the
way to the hose inlet record on the back of the
appliance by heating it in boiling water.
And tighten with a screwdriver by bringing
the clamp to the end of the hose. The hose
and
gasket
connection is as follows.
For natural gas connection, place the gas-
ket in the nut at the end of the natural gas
connection hose. Turn the nut to attach the
hose to the main gas pipe. Check for gas
leakage and complete the connection. The
hose and gasket inlet record required for
connection is as follows.
11
inlet
record
required
for
V.1
Publicidad
