Publicidad
Idiomas disponibles
Idiomas disponibles
replacing the appliance light
Replacement or maintenance of the LED lamps should be carried
out by authorized service center personnel.
start using your new refrigerator
• Before initial start, keep the refrigerator still for two hours before
connecting it to power supply.
• Before loading any fresh or frozen foods, the refrig-
erator should have run for 2-3 hours, or for above 4
hours in summer when the ambient temperature is
high.
• Provide enough space for convenient opening of the doors and
drawers.
545 mm
energy saving tips
• The appliance should be located in the coldest area of the room,
away from heat producing appliances or heating ducts, and away
from the direct sunlight.
• Let hot foods cool down to room temperature before placing
them in the appliance. Overloading the appliance forces the com-
pressor to run longer. Foods that freeze too slowly may lose qual-
ity, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before
placing them in the appliance. This cuts down on frost buildup in-
side the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax
paper, or paper toweling. Liners interfere with cold air circulation,
making the appliance less efficient.
• Organize and label food to reduce door openings and extended
searches. Remove as many items as needed at one time, and close
the door as soon as possible.
595 mm
1082 mm
135°
1033 mm
41
Publicidad
