Descargar Imprimir esta página

KitchenAid KSB565 Instrucciones Y Recetas página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Blender
Before
Use
NOTE: While the Blender is on or the
PULSE MODE indicator
light is blinking:
- Do not interfere with
blade movement
- Do not remove
pitcher lid
Operating
the
Blender
The KitchenAid ® Blender has five speeds:
STIR, CHOP, MIX, PURI_E and LIQUEF_ In
addition,
it also features
CRUSH ICE and
PULSE MODE.
1. With convenient
one-step
operation,
this unit will operate
only when a
speed selection
button
is pressed.
2. Before operating
the Blender, make
sure the pitcher
is properly
secured
in the locking
collar and assembly
is
positioned
on the Blender
base.
No
4. Press the desired speed button
for
continuous
operation
at that speed.
The red indicator
light above the
selected speed will stay lit. You may
change settings
without
stopping
the
unit by pressing
a new speed button.
IMPORTANT:
If blending
hot foods or
liquids,
remove the center
ingredient
cup.
Operate
only on STIR speed.
5. To turn off the Blender, press OFE
The Off button
will stop any speed
and deactivate
the Blender at the
same time.
6. Before removing
the pitcher assembly,
unplug
the power cord.
CRUSH ICE
Your KitchenAid ® Blender offers a CRUSH
ICE feature.
When selected, the Blender
will automatically
pulse at staggered
intervals
at the optimal
speed for crushing
ice or other ingredients.
1. Before operating
the Blender, make
sure the pitcher assembly
is properly
positioned
on the Blender base.
NOTE:
If a gap exists between
the locking
collar and the base, the pitcher
might
not
be locked into the locking
collar or the
coMar is not oositioned
properly
or tne
Blender oase. See Blender Assemb y for
further
instructions.
2. Put ingredients
into tne oitcher and
firm y attacn
id.
3. Press CRUSH ICE. The indicator
igqt wil
stay it. The Blender wi
automatica
y
oulse at staggerea
intervals.
NOTE:
If a gap exists between
the locking
collar and the base, the pitcher
might
not
be locked into the locking
collar or the
assembly
is not positioned
properly
on the
Blender base. See Blender Assembly
for
further
instructions.
3. Put ingredients
into the pitcher and
firmly attach
lid.
10

Publicidad

loading

Este manual también es adecuado para:

Ksb585