Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Blender
4. To turn off the CRUSH ICE feature
press OFE The Blender is now ready for
continuous
operation.
5.
Before removing
the pitcher assembly,
unplug the power cord.
PULSE MODE
Your KitchenAid ® Blender offers
PULSE
MODE, which
allows a "Pulse-at-any
Speed" feature.
NOTE:
PULSE MODE will not work with
the CRUSH ICE feature.
1. Before operating
the Blender, make
sure the pitcher assembly
is properly
positioned
on the Blender base.
NOTE:
If a gap exists between
the locking
collar and the base, the pitcher
might
not
be locked into the locking
collar or the
collar is not positioned
properly
on the
Blender base. See Blender Assembly
for
further
instructions.
2.
Put ingredients
into pitcher, and firmly
attach
lid.
3.
Press PULSE MODE. The indicator
light on
the button
will blink to indicate that all
five speeds are in the PULSE MODE.
4. Select a speed button.
Press and hold
for the desired length
of time. Both
the speed button
and PULSE MODE
indicators
will stay lit when
pulsing
at the selected
speed. When
button
/
is released, the blending
will stop,
but the Blender will remain
in PULSE
MODE and the PULSE MODE indicator
will return
to blinking.
To pulse again
or at another
speed, simply
press and
hold the button
of the desired speed.
5. To turn off the PULSE MODE feature,
press OFE The Blender is now ready for
continuous
operation.
6. Before removing
the pitcher assembly,
unplug
the power
cord.
Ingredient
Cup
The 2 oz. (60 ml)
ingredient
cup can be
used to measure
and add
ingredients
to the pitcher.
Remove cup
and add ingredients
at STIR, CHOP or MIX
speeds. When
operating
at higher
speeds,
with
a full pitcher or with
hot contents,
stop the Blender and then add ingredients.
Soft Start c_Blending
Feature
The Soft Start ® blending
feature
automatically
starts the Blender at a slower
speed to pull ingredients
into the blade
then quickly
increases to selected speed
setting
for optimal
performance.
NOTE: The Soft Start ® blending
feature
only works when a speed is selected from
the OFF mode
and does not work with the
PULSE MODE or CRUSH ICE features.
11
Publicidad
