Publicidad
Idiomas disponibles
Idiomas disponibles
WIRING
WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided
with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan.
If your house wire is larger than 12-gauge or there is more than one house wire to connect to the two
fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure outlet box is properly grounded and a ground (green or bare) wire is present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
NOTE: Black wires are hot power for fan. White wire is common for fan. Green or bare wire is ground.
NOTE: Please refer to installation and operating instructions for wall control.
Hardware Used
AA
Wire Nut
If you feel you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
Follow the steps below to connect the fan to your
household wiring. Use the plastic wire nuts (AA)
with your fan. Secure the plastic wire nuts with
electrical tape. Make sure there are no loose
strands or connections.
1. Make wire connections as follows, using the
wire nuts (AA).
From Fan
Black wire ------- Black wire (Hot)
White wire ------- White wire (Neutral)
Green wires* ---- Green or bare wire (Ground)
There are two green grounding leads: one
from the mounting bracket (A), one from the
downrod (D).
x 3
To Outlet Box
1
Neutral White(supply wire)
Hot Black(supply wire)
(wiring for fan to outlet box)
10
Ground
(green or bare)
Outlet Box
Green
Publicidad
