Publicidad
Idiomas disponibles
Idiomas disponibles
INITIAL INSTALLATION
1. Turn off circuit breakers and wall switch to the
fan supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
2. This fan can only be mounted with the downrod
(D) in the motor assembly.
NOTE: Angle mount or closemount configurations
are not available for this fan.
3. Check to make sure blades (H) will be at
least 30 in. from any obstruction and at least
7 ft. above the floor.
1
2
3
7 ft.
min.
6
7
30 in.
min.
Publicidad
