Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION
WARNING: To reduce the risk of personal
4.
injury, do not insert foreign objects between
rotating fan blades (H).
Insert the blade assembly through the slot in
the housing. Align the holes from the blade
arm (I) to the holes from the fan motor
assembly (F), and secure the blade assembly
in place with screws and lock washers (CC)
provided.
Repeat this procedure with the remaining
blades assembly.
Hardware Used
CC
Blade Arm Screw
5. Position the notches in the outer rim of
decorative cover (J) so they line up with the
tabs on the outside of the rim on the mounting
ring. Carefully lift the decorative cover (J) up
inside the mounting ring and secure it to the
fan by turning the decorative cover (J)
clockwise until snug. Make sure the
decorative cover is secured tightly.
4
x 14
5
Mounting
Ring
13
Publicidad
