Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION
1. Make sure connections are neatly tucked
into the ceiling outlet box.
Slide the canopy (B) up to the mounting
bracket (A) and place the key holes on the
canopy (B) over the loose canopy mounting
screws on the mounting bracket (A). Turn the
canopy (B) clockwise until it locks in place
at the narrow section of the key holes. Align
the circular hole on the canopy (B) with the
remaining hole on the mounting bracket (A),
secure the canopy mounting screw previously
removed in the hole, and tighten the two
canopy mounting screws.
2. Attach the canopy bottom cover (C) to the
canopy (B) by inserting the screw heads into
the key slots in the canopy bottom cover (C)
and rotating it clockwise.
NOTE: Adjust the canopy mounting screws
as necessary until the canopy (B) and
canopy bottom cover (C) are snug.
3. Attach the blade support plate (with screws
and lock washers) (G) and blades (H) to the
blade arms (I) by using the screws and lock
washers that on the blade support. Tighten
each screw securely starting with the center
screw. Make sure the blade (H) is straight.
Repeat these steps for the remaining blades.
1
Canopy Mounting
Screw
2
Canopy
Mounting
Screw
3
12
Canopy Mounting
Screw
Publicidad
