Publicidad
Idiomas disponibles
Idiomas disponibles
The content of this menu may not be displayed if the channel
installation is not completed and no channels are installed.
Channels Blocked: Select channel/s to be blocked
from the channel list. Highlight a channel and press
OK to select/unselect. To watch a blocked channel PIN
should be entered rst.
Programme Restrictions: Block programmes ac-
cording to the age rating information that is being
broadcasted with them. You can turn on or o restric-
tions, set rating systems, age limits, and block unrated
programmes using the options of this menu.
Inputs Blocked: Prevent access to the selected input
source content. Highlight the desired input option and
press OK to select/unselect. To switch to a blocked
input source PIN should be entered rst.
Change PIN: Change the PIN you de ned during the
initial setup. Highlight this option and press OK. You
will need to enter the current PIN rst. Then new PIN
entry screen will be displayed. Enter the new PIN twice
for con rmation.
Open Source Licences
Display Open Source Software licence information.
Accounts & Sign In
Highlight this option and press OK to sign into your
Google account. Following options will be available if
you have signed into your Google account.
Google: You can configure your data syncing
preferences or remove your registered account on the
TV. Highlight a service listed in the Choose synced
apps section and press OK to enable/disable data
sync. Highlight Sync now and press OK to sync all
enabled services at once.
Add account: Add a new one to available accounts
by signing in to it.
Apps
Using the options of this menu, you can manage the
apps on your TV.
Recently opened apps
You can display recently opened apps. Highlight See
all apps and press OK to see all the apps installed
on your TV. The amount of storage space that they
needed will also be displayed. You can see the version
of the app, open or force to stop the running of the app,
uninstall a downloaded app, see the permissions and
turn them on/o , turn on/o the noti cations, clear the
data and cache, etc. Highlight an app and press OK
to see available options.
Changing the storage location of an app
If you did priorly format your USB storage device
as device storage to extend the storage capacity of
your TV, you can move the app to that device. For
more information refer to the Storage section in the
Settings>Device Preferences menu.
Highlight the app you want to move and press OK to
see available options. Then highlight the Storage used
option and press OK. If the selected app is convenient
you will see your USB storage device as an option for
this app to be stored. Highlight that option and press
OK to move the app.
Note that the apps that moved to a connected USB
storage device will not be available if that device is
disconnected. And if you format the device with the TV
as removable storage, don't forget to back up the apps
using the related option. Otherwise, the apps stored on
that device will not be available after formatting. For
more information refer to the Storage section in the
Settings>Device Preferences menu.
Permissions
Manage the permissions and some other features
of the apps.
App permissions: The apps will be sorted by
permission type categories. You can enable disable
permissions for the apps from within these categories.
Special app access: Con gure some app features
and special permissions.
Security & restrictions: You can allow or restrict
installation of apps from sources other than the Google
Play Store.
Device Preferences
About: Check for system updates, change the device
name, reset the TV to the factory defaults and display
system information such as network addresses,
serial numbers, versions, etc. You can also display
legal information, manage advertisings, display your
advertising ID, reset it and turn on/o the personalised
advertisings based on your interests.
Factory reset: Reset all TV settings to the factory
defaults. Highlight Factory reset and press OK.
A con rmation message will be displayed, select
Factory reset to proceed with resetting. A further
con rmation message will be displayed, select
Erase everything to factory reset the TV. The TV
will switch o /on rst and the initial setup will start.
Select Cancel to exit.
Note: You may be asked to enter a PIN to proceed with the
initial setup. If you didn't set a PIN during the initial setup,
you can use the default PIN. The default PIN is 1234.
Net ix ESN: Displays your ESN number. ESN
number is an unique ID number for Net ix, created
especially to identify your TV.
Date & Time: Set the date and time options of your
TV. You can set your TV to automatically update
the time and date data over the network or over the
English - 17 -
broadcasts. Set corresponding to your environment
and preference. Disable by setting as O if you want
to manually change the date or time. Then set date,
time, time zone and hour format options.
Timer
Power On Time Type: Set your TV to turn on by
itself. Set this option as On or Once to enable a
power on timer to be set, set as O to disable. If
set as Once the TV will turn on only once at the
de ned time in Auto Power On Time option below.
Auto Power On Time: Available if the Power On
Time Type is enabled. Set the desired time for your
TV to come on from standby using the directional
buttons and press OK to save the new set time.
Power O Time Type: Set your TV to turn o by
itself. Set this option as On or Once to enable a
power o timer to be set, set as O to disable. If
set as Once the TV will turn o only once at the
de ned time in Auto Power O Time option below.
Auto Power O Time: Available if the Power O
Time Type is enabled. Set the desired time for your
TV to go to standby using the directional buttons and
press OK to save the new set time.
Language: Set your language preference.
Keyboard: Select your keyboard type and manage
keyboard settings.
Inputs: Show or hide an input terminal, change the
label for an input terminal, and con gure the options
for HDMI CEC (Consumer Electronic Control) function
and display the CEC device list.
Power
Sleep Timer: De ne a time after which you want
your TV to enter sleep mode automatically. Set as
O to disable.
Picture O : Select this option and press OK to
turn the screen o . Press a button on the remote
or on the TV to turn the screen on again. Note that
you can not turn the screen on via the Volume +/-,
Mute and Standby buttons. These buttons will
function normally.
No Signal Auto Power O : Set the behaviour of
the TV, when no signal is detected from the currently
set input source. De ne a time after which you want
your TV to turn itself o or set as O to disable.
Auto Sleep: De ne an idle time after which you
want your TV to enter sleep mode automatically. 4
Hours, 6 Hours and 8 Hours options are available.
Set as Never to disable.
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: Standard, Vivid, Sport,
Movie and Game.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Bright, Dolby Vision Dark and Dolby Vi-
sion Vivid picture mode options will be available instead
of other picture modes.
Backlight, Brightness, Contrast, Colour, HUE,
Sharpness settings will be adjusted according to
the selected picture mode.
Dolby Vision Noti cation: Set your noti cation ap-
pearance preference for Dolby Vision content. When
turned on, Dolby Vision logo will be displayed on
the screen when Dolby Vision content is detected.
Auto Backlight: Set your auto backlight preference.
O , Low, Middle and Eco options will be available.
Set as O to disable.
Backlight: Adjust the backlight level of the screen
manually. This item will not be available if the Auto
Backlight is not set as O .
Brightness: Adjust the brightness value of the
screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the
screen.
HUE: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle
and Bright options will be available.
Colour Temperature: Set your colour temperature
preference. User, Cool, Standard and Warm op-
tions will be available. You can adjust red, green and
blue gain values manually. If one of these values
is changed manually, Colour Temperature option
will be changed to User, if not already set as User.
Display Mode: Set the aspect ratio of the screen.
Select one of the prede ned options according to
your preference.
HDR: Turn the HDR function on or o . This item will
be available if HDR content is detected.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signals. Set your DNR preference as Low, Medi-
um, Strong, Auto or turn it o by setting as O .
MPEG NR: MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground. Set your MPEG NR preference as Low,
Medium, Strong or turn it o by setting as O .
Max Vivid: Manipulates contrast and colour
perception, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set
as On to enable.
Adaptive Luma Control: Adaptive Luma control
adjusts contrast settings globally according to
English - 18 -
Publicidad
