Publicidad
Idiomas disponibles
Idiomas disponibles
the Home tab on the Home Screen and the row with
this app will be named as Favourite Apps. In order
to access the Electronic Programme Guide press the
Guide button on the remote.
Use the directional buttons to navigate through
the programme guide. You can use the Up/Down
directional buttons or Programme +/- buttons to
switch to previous/next channel on the list and Right/
Left directional buttons to select a desired event of
the currently highlighted channel. If available, the full
name, start-end time and date, genre of the highlighted
event and a brief information about it will be displayed
on the screen.
Press Blue button to lter the events. Due to the
large variety of lter options you can nd events of
the desired type quicker. Press Yellow button to see
detailed information on the highlighted event. You can
also use the Red and Green buttons to see events
of previous day and next day. The functions will be
assigned to the coloured buttons on the remote when
they are available. Follow the on-screen information
for accurate button functions.
Press the Record button to add a timer for the
highlighted event in the guide. You can de ne the
type of the timer by setting the Schedule type option
as Reminder or Record. When other parameters are
set press the Green button. The timer will be added
to the schedule list. You can access the schedule list
from the Record menu in Live TV mode.
The guide can not be displayed if DTV input source
is blocked from the Settings>Channel>Parental
Controls>Inputs Blocked menu in Live TV mode or
on Home Screen.
Connecting to the Internet
You can access the Internet via your TV, by connecting
it to a broadband system. It is necessary to con gure
the network settings in order to enjoy a variety of
streaming content and internet applications. These
settings can be con gured from Settings>Network &
Internet menu. You can also highlight the Connected/
Not Connected icon on the Home screen and press OK
to access this menu. For further information refer to
Network & Internet section under the title of Settings.
Wired Connection
Connect your TV to your modem/router via an Ethernet
cable. There is a LAN port on the rear side of your TV.
The status of the connection under the Ethernet
section in the Network & Internet menu will change
from Not connected to Connected.
1.
Broadband ISP connection
2.
LAN (Ethernet) cable
3.
LAN input on the rear side of the TV
You might be able to connect your TV to a network
wall socket depending on your network's con guration.
In that case, you can connect your TV directly to the
network using an Ethernet cable.
1.
Network wall socket
2.
LAN input on the rear side of the TV
Wireless Connection
A wireless LAN modem/router is required to connect
the TV to the Internet via wireless LAN.
Highlight Wi-Fi option in the Network & Internet menu
and press OK to enable wireless connection. Available
networks will be listed. Select one and press OK to
connect. For more information refer to Network &
Internet section under the title of Settings.
English - 23 -
1.
Broadband ISP connection
A network with hidden SSID can not be detected by
other devices. If you want to connect to a network with
hidden SSID, highlight the Add new network option
under the Settings>Network & Internet menu on
the Home Screen and press OK. Add the network by
entering its name manually using the related option.
Some networks may have an authorisation system that
requires a second login as such in a work environment.
In this case, after connecting to the wireless network
you want to connect to, highlight Noti cations situated
on the upper right of the Home Screen and press OK.
Then highlight the Sign in to Wi-Fi network noti cation
and press OK. Enter your credentials to log in.
A Wireless-N router (IEEE 802.11a/b/g/n/ac) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimised for smoother
and faster HD video streaming, le transfers and
wireless gaming.
Use a LAN connection for quicker data transfer
between other devices like computers.
The transmission speed di ers depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line tra c
and the products that you use. The transmission may
also be cut o or may get disconnected depending
on the radio wave conditions, DECT phones or any
other WLAN 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
The location where the transmission is most e ective
di ers depending on the usage environment.
The Wireless feature of the TV supports 802.11 a,b,g,n
& ac type modems. It is highly recommended that
you should use the IEEE 802.11n communication
protocol in order to avoid any possible problems while
watching videos.
You must change your modem's SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use a
wired connection if you experience problems with a
wireless connection.
A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
Multi Media Player
On the Home Screen scroll to Apps row, select Multi
Media Player (MMP) and press the OK button to
launch. If this app is not available, highlight Add app
to favourites option (plus sign) on the Apps row and
press OK. Then select the Multi Media Player (MMP)
app and press OK to add. For some countries, the
Multi Media Player app will be situated in the Home
tab on the Home Screen and the row with this app will
be named as Favourite Apps.
Select the media type on the main media player screen.
On the next screen, you can press the Menu button to
access a list of menu options while the focus is on a
folder or a media le. Using the options of this menu
you can change the media type, sort the les, change
the thumbnail size and turn your TV into a digital photo
frame. You will also be able to copy, paste and delete
the media les using the related options of this menu, if
a FAT32 formatted USB storage device is connected to
the TV. Additionally you can switch the viewing style by
selecting either Normal Parser or Recursive Parser.
In Normal Parser mode the les will be displayed with
folders if any available. So only the selected type of
media les in the root folder or in the selected folder
will be displayed. If there isn't any media les of the
selected type, the folder will be assumed as empty. In
Recursive Parser mode the source will be searched
for all available media les of the selected type and
the found les will be listed. Press the Back/Return
button to close this menu.
In order to activate photo frame feature select Photo
as the media type. Then press the Menu button,
highlight Photo Frame and press OK. If you select
One Photo mode option and press OK the image that
you set as photo frame image earlier will be displayed
when photo frame feature is activated. If you select the
USB storage device option the rst le (in Recursive
Parser mode) will be displayed. To set the photo frame
image press the Menu button while the photo le of
your choice is displayed, highlight Photo Frame Image
and press OK.
Additionally, you can toggle between browsing modes
by pressing the Blue button. List View and Grid View
modes are available. While browsing for the video,
photo and text les a preview of the highlighted le
will be displayed in a small window on the left side of
the screen if the browse mode is set to List View. You
English - 24 -
Publicidad
