Technical Data - haacon SX Serie Instrucciones De Uso

3. DELIVERy
1 Set of spindle support device comprising:
1 Support with gear
1 Support without gear
1 Crank handle
1 Crank handle holder
1 Connection shaft
Model plate with gear
GB
Sample order for a support set
Type
Foot variant A - H - R - F - K
Installation height in mm
P = set / R = right / L = left
Crank
Connecting shaft
without gear
SX A 850 P 2 06
= SX
= A
= 850
= P
= 2
= 06

4. TEchNIcAL DATA

Hublast / set
Static test load
Lift / crank turn:
Low gear
Fast gear
Max. crank force (load 16 t)
Modifications of the design and execution reserved.
5. INSTALLATION
The spindle support device is a major safety component for uncoupled
semi-trailers. It is subject to high loads during the coupling and uncou-
pling processes. Great care and attention should therefore be given to
its installation. It may only be installed and commissioned by specially
trained personnel.
Read the operating manual before installing and commis-
sioning the support device.
Observe the accident prevention regulations issued by the professional
association relating to vehicle maintenance and the Machine Safety Law.
Installation in accordance with the following drawing is
recommended:
5 x M16-8.8
190 Nm
M16-8.8
190 Nm
– 10 –
SX
t 24
t 50 / 35 (R)
mm 1
mm 12
N 250
M16-8.8
190 Nm