Technical Data - CEMB SM628TI Manual De Uso

The pneumatic supply inlet point, in the workshop line,
must be equipped with a pneumatic supply shut-off
valve, placed upstream the filter/regulator unit sup-
plied with the machine (B Fig. 2a).
Before proceeding with the electrical and
pneumatic connection and whenever the
electrical and pneumatic power supply
is restored, make sure that the machine
is in the configuration described below:
- pedal A COMPLETELY LOW (turntable
closed).
1.2.e TECHNICAL DATA
- Table top clamping capacity:
• inside clamping .............................................................................................. 14"-27"
• outside clamping ............................................................................................ 11"-24"
- Rim width: .............................................................................................405 mm (15,5")
- Maximum tyre diameter: ........................................................................ 1120 mm (44")
- Bead breaking pressure: .................................................................................2900 Kg
- Air pressure: ....................................................................................................8-10 Bar
- Motor electrical features:
• 1ph version - 2 speed 230V - 50Hz (Motoinverter) .......................................0.75 kW
- Weight ................................................................................................................260 kg
- Weight of electrical/ electronic components: .....................................................11,5 kg
- Noise level: A-weighted sound pressure level (LpA) at the working position ... < 70 dB (A)
Motor Rating
200-230V / 1ph / 50Hz (Motoinverter) _ 2 speed
User's manual
DANGER
A
Kw rpm
0,75
7,5 - 18
B
2a
EN
17