COMPONENT LIST
1.
Blade
2.
Pivoting foot plate
3.
Tool-free blade clamp ring
4.
On/off switch
5.
Main handle
6.
Pivoting blade foot adjustment shank
TECHNICAL DATA
Type WS3660 (36 - designation of machinery, representative of reciprocating saw)
Rated voltage
Rated power
Rated no-load speed
Stroke length
Max cutting capacity
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
&K
pA
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
cutting boards
Cutting wooden beams
The declared vibration total value and the declared noise emission value have been measured in accordance with a standard test method and
may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ from the declared value depending on the
ways in which the tool is used especially what kind of workpiece is processed dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
EN
Wood
Steel
Vibration emission value a
Vibration emission value a
Uncertainty K = 1.5 m/s²
Vibration emission value a
Vibration emission value a
Uncertainty K = 1.5 m/s²
= 13.80 m/s²(Rear handle)
h,B
= 15.31 m/s²(Front handle)
h,B
= 11.44 m/s²(Rear handle)
h,WB
= 13.52 m/s²(Front handle)
h,WB
230-240V~50Hz
850 W
0-2800 /min
28 mm
115 mm
10 mm
/II
2.38 kg
L
= 95 dB(A)
pA
L
= 103 dB(A)
wA
5.0 dB(A)
5