VEVOR HM-594 Manual Del Usuario página 8

Connect the Extension Tube D and
C to the Base shaft.Ensure the tube
edges are connected tightly
together.
Connect the B-Pole to the Extension
Tube C.Turn the
B-pole counter-clockwise until the
adjuster is about 1.5"above the
A-pole and the adjusting hole is
visible.
ASSEMBIY INSTRUCTIONS
- 6 -
Remove the screws and the adapter
from the Cover,and then slide it onto
the Extension Tube C.(The Screws
will be re-assembled later.)
Once the B-Pole and A-Pole (and
any additional extensions) are
connected, insert the adapter into
the adjuster and then attach the
A-Pole to the upper dome.