Scarifier Specification; Fluids And Fill Quantities; Torques For Screws/Bolts; Wearing Parts - Solo 519 Manual De Instrucciones

Scarifier specification

Technical data:
Engine details:
- Engine : Honda GX 120
- Continuous engine power: 2.9 kW / 4.0 HP
- Max. preset
operating speed
- No. of cylinders
- Cooling system
- Starter
- Fuel
- Tank
Power transmission:
- V-belt
- Centrifugal clutch
Scarifier shaft:
- Working width
- No. of tines
- Tine pivoting range
- Quick tine
replacement system
- Speed of the
scarifier shaft
Working depth
in the ground
(recommended):
Machine data:
- Chassis
- Handle
- Wheels
- Axle, front
- Height adjustment
Machine dimensions:
- (L x W x H) : 88 x 56 x 55 cm
with the handle folded down
Total weight
51.0 kg
Noise emissions
Sound pressure, average
*1)
: 79.3 dB(A)
Sound power, average
*1)
: 93.3 dB(A)
Vibrations
Vibrations
Handle left/right, average
*1)
With equal weighting of idle speed and max.
speed.
519 519-50
Honda GX 160
4.0 kW / 5.5 HP
: 3600 rpm
: 1
: Fan cooling
: Cable pull
: Unleaded petrol
: 2.5 litres
: SPA
: Starting speed
1800 rpm
519 519-50
: 42 cm 52 cm
: 20 24
(4 x 5 tines) (4 x 6 tines)
: 270°
: Yes
: 2450 rpm
: max. 2-3 mm
: Steel
: Height-adjustable,
removable
: Ø 200 mm solid rubber
with ball bearings
: Fixed, adjustable
: Infinitely variable
519 519-50
88 x 66 x 55 cm
: approx. 40.5 kg
519 519-50
: 6.8 m/s² 6.8 m/s²

Fluids and fill quantities

Type
Engine oil
Fuel
Lubricating
grease

Torques for screws/bolts

Strength category
Tightening torque
Thread
To prevent overtightening, the bolts/screws must be
tightened in two stages. Once stage 1 has been
reached, reposition the torque wrench and continue
tightening until the specified torque is reached (stage
2).

Wearing parts

It is unavoidable that certain components will wear
during normal use. These components must therefore
be replaced in good time (which will depend on the
type and length of use).
The following wearing parts are not covered by the
manufacturer's warranty:
Scarifier tines, tine shaft, springs, bushes; wearing
parts – e.g. spark plugs, air filter; fluids – e.g. engine
oil.
ENGLISH Page - 19 -
Designation Viscosity
mm
SOLO all-
year 4T
engine oil
(0083115)
Petrol,
unleaded
Renolit Every 20h
Duraplex (at
EP2 months)
2 applicatons with a
SOLO
(0080432)
Stage 1
M 12 60
M 10 34
M 8 17
M 6 7
Fill
quantity
2
/s 40°
[litres]
30 to 0.6 litres
with filter
115
2.7 litres.
least every 6
grease gun
8.8
Nm
Stage 2
86
49
25
10