Clock/Timer
Setting the clock
1
In standby; press
CLOCK.
The clock digits for the hours flash.
5
Press
TIMER ON*OFF
again.
-» The clock digits for the minutes flash.
6
Turn
VOLUME
to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
7
Press
TIMER ON*OFF
to confirm the time.
-♦ The timer is now set and activated.
Activating and deactivating
TIMER
•
In standby or during playback, press
TIMER ON*OFF
once.
Display shows
timer
if activated, and ?
disappears if deactivated.
Activating and deactivating
SLEEP
2
Turn
VOLUME
to set the hours; clockwise for
hours up: counter-clockwise for hours down.
3
Press
CLOCK
again,
-> The clock digits for the minutes flash.
4
Turn
VOLUME
to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5
Press
CLOCK
to confirm the time.
Setting the timer
•
The system can be used as an alarm clock,
whereby the CD orTUNER is switched on at a
set time.The clock time needs to be set first
before the timer can be used.
•
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
The sleep timer enables the system to switch off
by itself after a set period of tiijpe.The dock time
needs to be set first before the sleep timer can
be used.
.o'o
..5
Press
SLEEP
on the remote
control once or more.
-* Display shows SLEEP and
one of the sleep time options
in sequence: 60, HS, 30, 15,
SLEEP uEE.Gu... if you have
selected a time. Once SLEEP is activated, SLEEP
OfJ scrolls across the display at repeated
»
intervals.
To deactivate,'press
SLEEP
on the remote
control once or more until SLEEP DEE is
shown, or press
STANDBY ON
on the system
or remote control.
1
In any mode, press
TIMER ON'OFF
for more
than 2 seconds.
2
Turn
VOLUME
clockwise (or press
SELECT
SOURCE)
to select sound source.
3
Press
TIMER ON'OFF
to confirm your
desired mode.
The selected source
or
iMlil'"
is shown. The clock digits for the hours flash.
4
Turn
VOLUME
to set the hours: clockwise for
hours up; counter-clockwise for hours down.
19