WMB TL-A300 Manual De Instrucciones página 6

Quick operation guide
2.14 - Adjustable stabilizing feet with rub-
ber non-slip supports.
2.15 - Safety catches to anchor the legs.
2.16 - Antirust protection, primed paint
with cured polyester dust cover. The tower
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
can be supplied with natural aluminium
finish or black (version B).
2.17 - Spirit level to adjust the tower ver-
tically.
2.18 - Swivel wheels to transport the lift
when folded.
3.1 - The TL-A300 is a machine designed to elevate
loads upwards in a vertical direction, It should NEVER
be used as a platform to elevate people.
3.2 - Only place the lift on hard, flat surfaces always
checking that it is in a vertical position by using the bub-
ble level indicator (L) found on the base. Adjust the leg
stabilizers (Q) by turning the handles (H) to level if ne-
cessary. NEVER use wedges or other foreign objects to
balance the lift.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be excee-
ded.
3.4 - This lift should NEVER be used to elevate a load
that has not been properly checked. It is necessary to
verify that the load is correctly supported and centred
on the appropriate lift support so that the weight of the
load will only elevate in a vertical direction.
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
6