Rothenberger RODIA DW CLEANER M Instrucciones De Uso página 26

fleece filter bag is replaced), it is necessary to replace the folded filter cartridges (see Changing
the folded filter cartridges).
Cleaning:
Notes: Acids, acetone and solvents can damage parts of the vacuum cleaner.
 Clean container and accessories with water.
 Wipe the top section with a damp cloth.
 Allow the container and accessories to dry.
5 Troubleshooting
Malfunctions cannot always be traced back to defects in the vacuum cleaner!
Symptom
Suction power drops
Vacuum cleaner does not
start
The vacuum cleaner does
not start when the tool is
switched on in the >A< or
>RA< mode
PE emptying and disposal
bag is sucked against the
filter
Vacuum cleaner with dust
classes M: with inserted
filter bag, dust is accumu-
lating in the container
Fill level indicator lights up
Do not try anything else, contact customer services.
6 Accessories
You can find suitable accessories in the main catalog or at www.rothenberger.com
7 Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200
www.rothenberger.com
22
Possible Reason
Filter dirty
Filter bag full
Container full
Motor protection filter blocked
Nozzle, tube or hose blocked
Mains plug not in socket
No mains voltage
Mains connection cable defec-
tive
Cover not properly closed
Water sensor switched off
Vacuum cleaner in standby
mode >A< or >RA<
Electrical tool not plugged into
socket on the vacuum cleaner
Solenoid valve of pneumatic
on-off unit contaminated
Incorrect position of rotary
slide
Incorrect position of rotary
slide
filter blocked
the suction hose is blocked
container is full
+ 49 (0) 61 95/ 800 7491  service@rothenberger.com -
ENGLISH
Solution
Clean
Change
Empty
Clean
Clean
Plug mains plug into socket
Check fuse
Replace
Close
Empty container
Set switch to >I< (see Dis-
play and control elements)
Plug mains plug into socket
on the vacuum cleaner
Rinse with alcohol
Set rotary slide to position
OPEN▲ (see Insert PE
emptying and disposal bag)
Set rotary slide to position
CLOSE ▲ (see Insert fleece
filter bag)
clean or change
clean
Empty