Romer Versa Guia Del Usuario página 11

3. Move the base up or down until
the entire blue marker is completely visible
between the two lines on the recline angle
indicators.
IMPORTANT: After the child is secured in
the child restraint (sold separately) and
the child restraint (sold separately) is
attached to the base, ensure that the
entire blue marker is completely visible
between the two lines on the recline
angle indicator.
If there is a problem achieving the proper recline
angle after installing, try another approved
seating position in your vehicle or:
a. Uninstall the base and lower the
recline angle adjustment foot to the lowest
position.
b. Remove the base from the vehicle and
place a rolled towel or pool noodle in the
vehicle seat bight.
c. Place the base against the towel or pool
noodle and install.
NOTE: If a towel or pool noodle is needed for the
recline angle, the recline angle adjustment foot
on the base should remain in its lowest position.
3
9