Romer Versa Guia Del Usuario página 29

2. Open the SecureLoc.
a. Grab the SecureLoc handle
and squeeze the button.
b. Lift the SecureLoc handle.
3. Pull the vehicle belt from the
base belt routes.
Rigid Lower Connector Uninstall
1. Open the SecureLoc.
a. Grab the SecureLoc handle
and squeeze the button.
b. Lift the SecureLoc handle.
2. Slide each of the red release tabs
on the lower connectors away
from the lower anchors to release
and pull.
NOTE: If red release tabs are not
accesible, move base side to side
from seat to loosen, if necessary.
2
1
2
27