Romer Versa Guia Del Usuario página 24

4. Push the rigid lower connectors onto
the vehicle lower anchors until
a click is heard.
NOTE: Pull the lower connectors to verify
they are secure.
5. Close the SecureLoc by pushing
down on the SecureLoc handle.
NOTE: Ensure indicator in window
is ENTIRELY BLACK.
NOTE: A click helps confirm the
SecureLoc is secure.
6. Push the base into the vehicle seat
bight until the rear of the base
contacts the back of the vehicle seat.
NOTE: If recline indicator is not aligned,
base may need to be tightened further.
22
4
5
YES
6
NO