Listening To Audio - BlueAnt T1 Guia De Inicio Rapido

9

Listening to Audio

The T1 supports A2DP audio streaming: if your phone or
Bluetooth device supports the A2DP profi le then you can
simply start playing music or any other audio (including
directions from a GPS application on the phone) and it will
automatically transfer to the T1.
The audio will mute automatically if you make or receive a
phone call, and resume when the call ends.
10
Multipoint
Up to 2 phones can connect to the T1 at the same time. To
pair a second phone:
1. Use your phone's Bluetooth menu to disconnect the
existing paired phone from the T1.
2. With the T1 switched on, hold down the MFB until the T1
starts to talk you through the pairing process.
3. When the pairing is complete, use the Bluetooth menu on
each phone to reconnect them to the T1.
When you have 2 phones connected, you can always answer
a call on either phone. If you initiate a call through the T1 it
will happen on the "primary phone": the one that connected
to the T1 fi rst.