Audibax CHICAGO 475 ZOOM Manual De Usuario página 10

CHICAGO 475 ZOOM
PRO
Display temperature
To select Display Warning, press the ENTER button to show the DISPLAY WARNING on
the display. Use the UP/DOWN button to select No (Normal) or Yes (display will show the
error warning when the unit went wrong), press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Fixture Test
Enter MENU mode, select Fixture Test, press the ENTER button to confirm, use the
UP/DOWN button to select Auto Test or Manual Test
Auto Test
To select Auto Test, press the ENTER button to show the AUTO TEST on the display. Press
the ENTER button, the unit will run built-in programs to automatically test pan, tilt and
zoom. Press the MENU button back to the last menu or exit menu mode after auto test.
Manual Test
To select Manual Test, press the ENTER button to show the MANUAL TEST on the display.
Press the ENTER button, and then use the UP/DOWN button to select channel, and
adjust the channel value. Once selected, press the ENTER button to setup, the fixture will
run as the channel value indicates. Press the MENU button back to the last menu or exit
menu mode let the unit idle one minute.
(All channels value will become 0 after exiting Manual Test menu)
Unit information
Enter MENU mode, select Fixture Information, press the ENTER button to confirm, use
the UP/DOWN button to select Fixture use time, Lamp On tme or Firmware Version.
Fixture use time
To select Fixture use time, press the ENTER button to show the FIXTURE USE TIME on the
display. Press the ENTER button, the fixture working hours will show on the display. Press
the MENU button to exit.
Lamp Use Time
To select Lamp On time, press the ENTER button to show the LAMP ON TIME on the
display. Press the ENTER button to confirm, then use the UP/DOWN button to select Exit
or Reset Time, press the ENTER button to store. Press the MENU button back to the last
menu or exit menu mode let the unit idle one minute.
Firmware Version
To select Firmware Version, press the ENTER button to show the FIRMWARE VERSION on
the display. Press the ENTER button and the fixture software version will show on the
display. Press the MENU button to exit.
Unit reset
Enter MENU mode, select Reset Function, press the ENTER button to confirm, use the
UP/DOWN button to select Pan/Tilt, Zoom or All.
Pan/Tilt
To Select Pan/Tilt, press the ENTER button to show the PAN/TILT on the display. Use the
UP/DOWN button to select Yes (the unit will run built-in program to reset pan and tilt to
their home positions) or No, press the ENTER button to store. Press the MENU button to
exit menu mode.
www.audibax.com 8