Audibax CHICAGO 475 ZOOM Manual De Usuario página 13

Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address
from 1 to 512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select DMX Functions, press the ENTER
button to confirm, use the UP/DOWN button to select DMX Address, press the ENTER
button to confirm, the present address will blink on the display, use the UP/DOWN button
to adjust the address from 001 to 512, and press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle 7 seconds to exit menu mode.
DISPOSAL
Packaging:
1. The packaging can be recycled using standard disposal methods and reintroduced into
the reusable material cycle.
2. Please follow the laws and regulations regarding disposal and recycling of packaging in
your country.
Device:
1. This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive
of the European Union. Used appliances should not be disposed of with household waste.
Used device must be disposed of through an approved disposal company or a municipal
disposal facility. Please comply with the applicable regulations in your country.
2. Please follow all the disposal laws and regulations in your country.
3. As a customer, you can obtain information on environmentally-friendly disposal options
from the product seller or the appropriate regional authorities.
www.audibax.com
CHICAGO 475 ZOOM
11
PRO