Audibax CHICAGO 475 ZOOM Manual De Usuario página 8

CHICAGO 475 ZOOM
PRO
Unit Configuration
Enter MENU mode, select Fixture Setting, press the ENTER button to confirm, use the
UP/DOWN button to select Pan Inverse, Tile Inverse, P/T Feedback, BL.O. P/T Moving,
White Balance, Cooling Mode, Dimmer Curve or Dimmer Speed.
Pan Inverse
To select Pan Inverse, press the ENTER button to show the PAN INVERSE on the display.
Use the UP/DOWN button to select No (normal) or Yes (pan inverse), press the ENTER
button to setup. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Tilt Inverse
To select Tilt Inverse, press the ENTER button to show the TILT INVERSE on the display.
Use the UP/DOWN button to select No (normal) or Yes (tilt inverse), press the ENTER
button to setup. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
P/T Feedback
To select P/T Feedback, press the ENTER button to show the PAN/TILT FEEDBACK on the
display. Use the UP/DOWN button to select No (Pan or tilt's position will not feedback
while out of step) or Yes (Feedback while pan/tilt out of step), press the ENTER button to
setup. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
BL.O. P/T Moving
To select BL.O. P/T Moving, press the ENTER button to show the BLACKOUT WHILE
PAN/TILT MOVING on the display, use the UP/DOWN button to select No (normal while
pan/tilt moving) or Yes (blackout while pan/tilt moving), press the ENTER button to setup.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
White Balance
To select White Balance, press the ENTER button to show the WHITE BALANCE on the
display, use the UP/DOWN button to select Red, Green or Blue. Once selected, press the
ENTER button to confirm, and use the UP/DOWN button to adjust the value from 125 to
255, press the ENTER button to setup. Press the MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Fan Level
To select Cooling Mode, press the ENTER button to show the FAN MODE on the display.
Use the UP/DOWN button to select Auto (Normal) or Low (Low speed). Once selected,
press the ENTER button to setup. Press the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to show the DIMMER CURVE on the
display, use the UP/DOWN button to select Linear, Square Law, Inverse Squ. or S‐curve.
Once selected, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
www.audibax.com 6