Audibax CHICAGO 475 ZOOM Manual De Usuario página 9

CHICAGO 475 ZOOM
PRO
Dimmer Modes:
DMX% DMX% DMX% DMX%
(Optically Linear) (Square Law) (Inverse Square Law) (S-Curve)
Linear: The increase in light intensity appears to be linear as DMX value is increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high
levels.
S‐curve: Light intensity control is finger at low levels and high levels and coarser at
medium levels.
Dimmer Speed
To select Dimmer Speed, press the ENTER button to show the DIMMER SPEED on the
display. Use the UP/DOWN button to select Fast or Smooth. Once selected, press the
ENTER button to setup. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Display Setting
Enter MENU mode, select Display Setting, press the ENTER button to confirm, use the
UP/DOWN button to select Display Inverse, Backlight Auto Off, Backlight Intensity,
Temperature unit or Display Warning.
Display Inverse
To select Display Inverse, press the ENTER button to show the DISPLAY INVERSE on the
display. Use the UP/DOWN button to select No (normal) or Yes (display inverse). Once
selected, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
Backlight Auto Off
To select Backlight Auto Off, press the ENTER button to show the BACKLIGHT AUTO OFF
on the display. Use the UP/DOWN button to select No (display always on) or Yes (display
goes off one minute after exiting menu mode). Once selected, press the ENTER button to
confirm and store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Backlight Intensity
To select Backlight Intensity, press the ENTER button to show the BACKLIGHT INTENSITY
on the display. Use the UP/DOWN button to adjust the intensity from 1 (dark) to 10
(bright). Once selected, press the ENTER button to setup and store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Temperature Unit
To Select Temperature Unit, press the ENTER button to show the TEMPERATURE UNIT on
the display. Use the UP/DOWN button to select or , press the ENTER button to store.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
www.audibax.com 7