Balluff BTL6-P510-M0050-E2-KA05 Manual De Instrucciones página 20

BTL6-P510-M _ _ _ _ -E2/E28-KA _ _ /LA _ _
Magnetostrictive Linear Position Sensor – Rod Style
1
Notes to the user
1.1 Validity
This guide describes the construction, function and setup
options for the magnetostrictive linear position sensor BTL
with digital interface. It applies to models
BTL6-P510-M _ _ _ _ -E2/E28-KA _ _/LA _ _ (see Type
code on page 13).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– BTL
– Condensed guide
The magnets are available in various models
and must be ordered separately.
1.4 Approvals and markings
UL approval
File no.
E227256
US Patent 5 923 164
The US patent was awarded in connection with this
product.
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
not for BTL6-...-LA
1)
4 english
1)
The BTL meets the requirements of the following product
standards:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced
by high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
Note on EMC characteristics
(only BTL6-P510-...-LA_ _)
EMC characteristics can only be ensured if the
BTL6-P510-...-LA_ _ is completely installed in a
grounded metal housing.
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 4