Publicidad
Idiomas disponibles
Idiomas disponibles
Install Grill
Place grill into outdoor enclosure, but leave enough room in the
back to connect to the gas supply.
LP Gas Installation
1.
Check that the LP gas pressure regulator/hose assembly
is positioned under the grill (as shown in the following
illustration) and is not pinched or kinked.
2.
Use 4 screws and the 2-piece 90º clamp mounting bracket
provided to attach the 90º brass connector to the back of
the enclosure. The brass connector is located between the
flexible gas hose and the LP gas pressure/hose assembly.
A
B
A.
4 screws
B.
2 piece 90º clamp mounting bracket
Grease Cup Bracket Installation
1.
Attach the left and right grease cup bracket on firebox
bottom panel under side, align screw holes, insert 4
screws into these screw holes. Screws lock from firebox
bottom panel under side.
2.
Tighten these 4 screws.
11
Publicidad
