Playing A Disc; Display Items; Repeat And Shuffle Play; Usb Devices - Sony CDX-M60UI Manual De Instrucciones

CD

Playing a disc

1
Press (OPEN).
2
Insert the disc (label side up).
3
Close the front panel.
Playback starts automatically.
Ejecting the disc
1 Press (OPEN).
2 Press Z.
The disc is ejected.
3 Close the front panel.

Display items

A Source
B Track name* 1 , Disc/artist name*
name* 1 , Album number*
Track number/Elapsed playing time, Clock
*1 The information of a CD TEXT, MP3/WMA/AAC is
displayed.
*2 Album number is displayed only when the album is
changed.
To change display items B, press (DSPL).
Tip
Displayed items will differ depending on the disc type,
recording format and settings.

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM*
SHUF ALBUM*
SHUF DISC
* When an MP3/WMA/AAC is played.
To return to normal play mode, select "
or "SHUF OFF."
12
1 , Artist
2 , Album name* 1 ,
To play
track repeatedly.
album repeatedly.
album in random order.
disc in random order.
OFF"

USB devices

For details on the compatibility of your USB
device, visit the support site.
Support site
For customers in the U.S.A. and Canada:
http://esupport.sony.com
http://www.xplodsony.com/
For customers in Europe:
http://support.sony-europe.com
For customers in Latin America:
http://esupport.sony.com/ES/LA/
For customers in Pan Asia:
http://www.sony-asia.com/section/support
http://www.sony-asia.com/caraudio/
• MSC (Mass Storage Class) and MTP (Media
Transfer Protocol) type USB devices compliant
with the USB standard can be used.
• Corresponding codec is MP3 (.mp3), WMA
(.wma) and AAC (.m4a).
• Backup of data in a USB device is
recommended.
Note
Connect the USB device after starting the engine.
Depending on the USB device, malfunction or damage
may occur if it is connected before starting the engine.

Playing back a USB device

1
Remove the USB cap from the USB
connector and connect the USB
device to the USB connector.
Playback starts.
If a USB device is already connected, to start
playback, press (SOURCE) repeatedly until
"USB" appears.
Press (OFF) to stop playback.