Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
SOOT, OR ASH WITH STANDARD WET/DRY FILTER. THIS IS A VERY
FINE DUST WHICH WILL NOT BE CAPTURED BY THE FILTER AND MAY
CAUSE DAMAGE TO MOTOR. WHEN VACUUMING FINE DUST USE A
FINE DUST FILTER.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. In order to prepare your vacuum for dry vacuuming, make sure the cloth filter completely covers
the filter cage. Your wet/dry vacuum comes with the reusable cloth filter pre-installed. For filter
installation instructions, see page 15 (Fig. 2 & 3).
3. Place the powerhead back on the collection tank, and secure it in place using the latches (Fig. 4).
OPERATING INSTRUCTIONS: DRY VACUUMING
4. Insert the larger end of the hose into the vacuum port on the collection tank.
5. Push the required accessory onto the free end of the hose or extension wand (Fig. 5).
6. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power outlet.
Plug the power cord into the outlet (Fig. 6 & 7).
7. Turn the motor on by flipping the on/off switch to the 'I' ON position and begin vacuuming (Fig. 8).
8. Once you have completed vacuuming, flip the switch to the 'O' OFF position and unplug the power
cord from the outlet.
O = OFF
DO NOT USE THE REUSABLE CLOTH FILTER FOR LIQUID VACUUMING.
DO NOT VACUUM DRYWALL DUST, FIREPLACE
I = ON
11
Publicidad
