HT Italia HT3013 Manual De Instrucciones página 37

5.5. RESISTANCE MEASUREMENT
Before attempting any resistance measurement, remove power from the
circuit under test and discharge all capacitors, if present.
Fig. 7: Use of the instrument for Resistance measurement
1. Select the position 
2. Insert the red cable into input terminal VHz%
terminal COM.
3. Position the test leads in the desired points of the circuit to be measured (see Fig. 7).
The display shows the value of resistance.
4. If the symbol "O.L" is displayed, this indicates overload status.
5. For use the HOLD, RANGE and MAX MIN functions, please refer to § 4.2.
CAUTION
EN – 12
and the black cable into input
HT3013