Sanctuary Reserve SA-PLAT-2-D Manual De Instrucciones página 10

8. GLASS SHELF INSTALLATION
1.
First, remove the protective
film from the acrylic mirror
back wall.
Then, remove the tempered
glass shelving from the
protective packaging located
at the bottom of the safe
and gather all provided
hardware.
Screw all provided shelving
2.
brackets into place on both the
left and the right walls of the safe
using a Phillips head screwdriver.
Note: Do not overtighten.
Rotate the front shelving brackets
3.
45 degrees on both sides of the
safe.
Note: The back brackets remain
straight.
9