Publicidad
Idiomas disponibles
Idiomas disponibles
12. SILENT ENTRY MODE
13. PROPER PLACEMENT AND MOVING OF SAFE
1. To maximize burglary protection and stability, securing the safe to the floor or
wall is recommended.
2.
SA Consumer Products recommends that you store your safe in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes.
3. Always ensure the safe is i n an isolated and dry area. Never place the safe in
direct contact with a wet floor. When installing your safe on a concrete floor,
use of a moisture/protective barrier is highly recommended. Failure to do so,
or exposing the safe to chemicals or other adverse environments, may void
the warranty.
14. KEEPING YOUR SAFE DRY
We recommend placing a moisture/protective barrier between your safe and
concrete floor to prevent any moisture, mildew and rust damage to the safe. Installing
your safe in a place with climate control (heat in the winter and cooling in the summer)
is highly recommended. In areas of high humidity or frequent temperature fluctuations
(garages) it is recommend to take appropriate precautions to ward against moisture
damage. We strongly encourage the use of an internal dehumidifier and/or desiccants
to protect your contents from rust or mildew. Internal dehumidifiers should not be
in direct contact with the side or back walls.
By activating the silent entry mode, the safe will no
longer make audible sounds.
1
2
3
4
Swipe finger(s) across the touch pad
5
6
7
8
9
0
#
*
to "wake up" and activate the lock face.
Two random numbers will illuminate when the
lock face wakes up. Individually press both of
the two numbers, in any order, to allow full
access to the touch pad.
To turn on silent entry mode, press and hold the
(*) for 3 seconds and the yellow LED flashes 2 times
indicating the safe is now in silent entry mode.
To turn the sound back on, press and hold the
(*) for 3 seconds and the yellow LED flashes 2 times
and will beep indicating you are no longer in silent
entry mode.
13
Publicidad
