Sanctuary Reserve SA-PLAT-2-D Manual De Instrucciones página 7

3. INITIAL ENTRY (Continued)
6.
Locate the 1x9V battery.
Install into the battery
compartment on the back
of the lock face in the
proper orientation. The
touch pad will beep when
batteries are successfully
installed.
WARNING: The batteries must be inserted with the correct polarity. Exhausted batteries
must be removed from the product and discarded safely. Do not mix old and new
batteries. Do not mix alkaline or standard (carbon – zinc) batteries. Do not use recharge-
able (nickel – cadmium) batteries.
Plug the electronic lock cable
7.
into the back of the lock face.
The connector on the cable
will only fit into the connector
in the lock face in one way.
8.
Align the lock face to the
backer plate, with the lock
face slightly rotated to the
left. Turn clockwise until you
feel the lock face click into
place. Once the lock face has
been installed, locate the
remaining spokes inside of the
safe. Insert each individual
spoke into a threaded opening
and turn clockwise to install.
FRONT OF LOCK FACE
1 2 3 4
8
5 6 7
#
9 0
*
BACK OF LOCK FACE
1 2 3 4
8
5 6 7
#
9 0
*
9V BATTERY
6