Publicidad
Idiomas disponibles
Idiomas disponibles
16
EN
04
Commissioning and operation
04.01
Display and operation
Displays
Connected power supply
– –
Two blue stripes on the display indicate
when the power supply is present. If there
is no request, the unit is in STAND BY
mode.
Dehumidification active
This orange LED indicates that
dehumidification is active. If the symbol is
not illuminated, no dehumidification is
being requested at that moment.
Cooling function active
This green LED indicates that in addition
to dehumidification, the cooling is
activated as well. If the symbol is not
illuminated, there is no request for cooling
at that moment.
Continuous ventilation active
This orange LED lights up when the
continuous ventilation request is
activated. Otherwise there is no request.
–
Compressor running
If this green LED lights up continuously,
the compressor is in operation. When this
LED flashes, the compressor is in Pause
mode. This mode is active during the
switch-on phase and during the
automatic defrosting phase controlled by
the microprocessor.
– –
– –
– –
– –
– –
Alarm – HPS
– –
If this red LED lights up, the high-pressure
switch has tripped and stopped the
refrigerant circuit. Please refer to chapter
04.03 for possible causes and how to
proceed.
Alarm – GENERAL
If this red LED lights up, the unit is in a
fault mode. Please refer to chapter 04.03
for possible causes and how to proceed.
– –
Buttons
Set buttons
These buttons are only
necessary for configuration
and are not relevant for
operation or proper
maintenance.
HOURS
When this button is pressed, the
operating hours of the compressor are
displayed.
Publicidad
