Sauder Via 401527 Instrucciones De Montaje página 3

Step 1
NOTE: The 401527 Keyboard Shelf attaches to the 401448 Credenza or the
å
401446 Desk Return only.
Assemble your unit on a carpeted fl oor or on the empty carton to avoid
å
scratching your unit or the fl oor.
Separate the EXTENSION SLIDES (D) from the EXTENSION RAILS (B and C)
å
as shown in the upper diagram below. Be prepared, the parts are greasy.
Fasten the EXTENSION SLIDES (D) to the KEYBOARD SHELF (A). Use four
å
BLACK 7/8" LARGE HEAD SCREWS (17S).
Push a CORD CLIP (4P) into the hole in the KEYBOARD SHELF (A).
å
NOTE: The CORD CLIP is used to hold your keyboard cord against the
å
KEYBOARD SHELF.
D
www.sauder.com/services
D
Push the metal release levers in and pull the SLIDES (D) from the RAILS (B and C).
Open end
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
D
BLACK 7/8" LARGE HEAD SCREW
401527
B
4P
Open end
17S
(4 used in this step)
Page 3