Greencut GGT200L Guía De Mantenimiento página 51

TROUBLESHOOTING
PROBLEM-SOLUTION TABLE
THE TABLE INCLUDES SOME OF THE MOST COMMON PROBLEMS AND THEIR REMEDIES.
PROBLEM
The device
switches off
The device will
not turn on
The line breaks off
too frequently
Automatic line
adjustment
doesn't work
Strong noise
or vibrations
CAUSE
• The battery pack is too hot
• The battery pack is discharged
• The temperature of the device (electronics) is too high
• The battery pack is discharged
• Battery pack temperature is too high or too low
• The battery pack is defective
• The line comes into contact too frequently with fixed objects, e.g.
fences, trees, etc.
• The line spool is empty
• The line spool is dirty
• The line has torn off and is pulled into the line spool. The line has
become caught in the spool.
• The line is melted onto the spool
• Device fasteners have come loose
SOLUTION
• Carga la batería
• Deja reposar la batería en un sitio fresco
• Deja reposar la máquina en un sitio fresco y, si es necesario, limpia
las ranuras de ventilación
• Carga la batería
• Deja reposar la batería en un sitio fresco
• Reemplaza la batería por una nueva
• Use the plant protection guard
• Replace the line spool
• Use a brush to remove dirt from the parts
• Take off the line spool; if necessary, rewind the line by gently
pulling, and then insert the spool.
• Remove the melted line part; if necessary, rewind the line by gently
pulling, and then insert the spool.
• Consult technical support
51
EN - GGT200L