Parts And Components; Before Use; Installation - cecotec BOLERO FLUX IM 523500 INOX A Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Power button
2. Low speed button
3. Medium speed button
4. High speed button
5. Light button
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Kitchen hood
- Assembly kit (depending on model)
- Instruction manual

3. INSTALLATION

- Before installing the kitchen hood, make sure that the area is clean to prevent it from
sucking in dust or dirt.
- Please note that the kitchen hood must not share the same ventilation duct with other
appliances that use gas or other fuses.
- To facilitate air outlet, the ventilation duct should have a curvature of ≥120° and should be
46 BOLERO FLUX IM 523500 INOX A / IM 756500 INOX A