Publicidad
Step 6
å
First, fill two holes in the LEFT END (B) 1/4 to 1/2 full with GLUE (177M). Then,
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown.
å
Now, fill the holes in the LEGS (O and P) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (O and P) to the LEFT END (B). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LEFT END insert into the LEGS. Wipe
away the excess GLUE.
15F
These surfaces
should be even.
15F
These surfaces
should be even.
Page 10
P
S u r
f a c
H I D
e w
D E N
i t h
C A
M S
B
O
428192
1
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
End with hole
Edge with
TWIST-LOCK®
FASTENERS
End with hole
www.sauder.com/service
Publicidad
