Publicidad
Step 5
å
First, fill two holes in the RIGHT END (A) 1/4 to 1/2 full with GLUE (177M). Then,
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
å
NOTE: Be sure to position the parts exactly as shown.
å
Now, fill the holes in the LEGS (H and S) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEGS (H and S) to the RIGHT END (A). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the RIGHT END insert into the LEGS.
Wipe away the excess GLUE.
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
These surfaces
should be even.
1
2
www.sauder.com/service
H
A
S u r
f a c
H I D
e w
D E N
i t h
C A
M S
S
428192
1
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
End without hole
15F
End without hole
Page 9
Publicidad
