Publicidad
Step 11
å
Fill the holes in the TOP (K) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the LEFT END (B) to the TOP (K). Tighten two
TWIST-LOCK® FASTENERS. Wipe away the excess glue.
å
NOTE: Be sure the WOOD DOWELS in the LEGS insert into
the holes in the TOP.
å
Fasten the BACKS (G) to the TOP (K). Tighten four TWIST-
LOCK® FASTENERS.
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely difficult.
Page 16
Meet Part (K). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But definitely makes for a sturdier
Lateral File that' s easier to assemble
and friendlier to the environment.
B
G
428191
2
Now might be a
good time to refresh
your drink.
This groove
must be here.
K
G
www.sauder.com/service
Publicidad
